Abit Intel Pentium 4 System Board Socket 775 AW8 Manual de usuario descargar pdf (Pagina 20)

2-12 Chapter 2

(6). Front Panel Switches & Indicators Headers

This header is used for connecting switches and LED indicators on the chassis front panel.

Watch the power LED pin position and orientation. The mark “+” align to the pin in the figure below

stands for positive polarity for the LED connection. Please pay attention to connect these headers. A

wrong orientation will only cause the LED not lighting, but a wrong connection of the switches could

cause system malfunction.

• HLED (Pin 1, 3):

Connects to the HDD LED cable of chassis front panel.

• RST (Pin 5, 7):

Connects to the Reset Switch cable of chassis front panel.

• SPKR (Pin 13, 15, 17, 19):

Connects to the System Speaker cable of chassis.

• SLED (Pin 2, 4):

Connects to the Suspend LED cable (if there is one) of chassis front panel.

• PWR (Pin 6, 8):

Connects to the Power Switch cable of chassis front panel.

• PLED (Pin 16, 18, 20):

Connects to the Power LED cable of chassis front panel.

AW8 Series

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 79 80

Sin comentarios

Abit Intel Pentium 4 System Board Socket 775 AW8 Manual de usuario Pagina 20